Neximage 5 Driver For Mac
ICap - Camera Control Software. ICap is authored by The Imaging Source and has been specifically designed for use with Celestron Skyris astronomical CCD cameras. Note: Do not rename downloaded drivers, this may defeat backward compatibility features and might prevent your driver from installing. If you receive a message that 'Platform 5 is required' then please check carefully that your setup filename is indentical to the one on the web site. BEST ANSWER: The drivers and software used with most Celestron products are (as of Fall 2009) not compatible with Mac operating systems. Though Celestron provides no support for these workarounds, some people have had success using Mac-based software and utilities to run Windows on Macs.
Neximage 5 Driver Windows 10
Ascom 2X Mount Adaptor (Paramount, etc., 6.1) for TheSky X and TheSky 5/6 (external link) This is supplied by Software Bisque and is available from the Downloads section of the Software Bisque site, the file is called Ascom 2X Mount Adaptor Setup.exe Installs a driver that connects to Software Bisque's and makes it look like a standard ASCOM telescope. This allows ASCOM-based astronomy software to use TheSky (including TPOINT and ProTrack) as a smart telescope controller. For more information see (section 1). It is required for the Paramount mounts, and may be used with TheSky controlling any other of its supported telescope types, or via its built-in outbound ASCOM support, and then using ASCOM telescope drivers. This driver provides support, 100%, and compatibility with TheSky X (10.2.0 or later).
It should also work with TheSky6 and TheSky5 but not all functionality will be present. Celestron Unified (6.0.6338, June 2017) Driver name (users, in the Chooser): Celestron Telescope Driver ProgId (programmers only): ASCOM.Celestron.Telescope Installs a driver for all computerized telescopes. This version has passed the tests and has support for programmably changing pier side. It also recognises the StarSense HC. Park and Unpark use the mount Hibernate/Wakeup commands for NexStar+ HCs version 5.24. See the help file and release notes(!), installed as part of the driver, for a full description. This driver does NOT support Synta mounts.
Celestron Neximage 5 Drivers
Use the listed below. Digital Setting Circles (David Ek, external link) This ASCOM driver allows the use of a variety of commercial and homebrew passive encoder-based digital setting circles systems with any Windows software that supports the ASCOM standard.
This driver works with either alt-az mounts (like a dobsonian) or equatorial mounts. Equatorial mounts do not need to be accurately polar-aligned (although an accurate polar alignment will likely lead to a more satisfying observing experience). The button leads to David's web site for this driver as well as other info on DSCs. Meade Universal Driver Project (June 2014) Link to a driver that recognizes new telescopes (LX850 and LX600), some earlier LX200GPS telescopes, and telescopes that recognize basic Meade Commands (e.g., LX200 Classic, Centurion). Provides position readout, slews, side of pier (where appropriate), and pulse guiding among its basic capabilities.
It has passed Conformance Checking for the and the and has been run with a number of other Meade telescopes. While not complete functionality (e.g., missing tracking control, focus control, slew rate selection), this is the first iteration of a driver that is intended provide replacement capabilities for all existing Meade drivers. Please Note: This driver reports that it cannot control tracking (on/off) so it may not be suitable for automation applications. Meade LX200 Classic and Autostar #494, #495, and #497 (combined telescope/focuser, 5.0.4) Installs a driver for the original LX200 ('classic') telescope mounts (including the 16'), as well as Meade telescopes that use the Autostar I (#494, #495 and #497) controllers, such as the ETX and DS series. This driver provides both telescope and focuser interfaces each of which may be used by separate programs. Do not use this with the LX200GPS, LX200R or the RCX400. V5.0.4 corrects installer and driver version mismatches only, no logic in the driver has changed since 2008. 
